Technology Explained

Shure AONIC 50 Second-Gen: Unveiling the Future of Premium Headphones at IFA 2023

Published

2 years ago

September 7, 2023

Ethan Daniel

Shure AONIC 50 Second-Gen

The world of premium headphones is about to be shaken once again as Shure, a renowned name in audio technology, takes a bold step forward. The second-generation Shure AONIC 50 headphones have been unveiled at IFA 2023, promising an array of exciting upgrades that redefine the listening experience. In this article, we’ll delve deep into the realm of these headphones, exploring their innovative features, exceptional sound quality, and why they matter to the discerning audiophile.

The Legacy Continues: Shure AONIC 50’s Remarkable Journey

When the original Shure AONIC 50 headphones made their debut in 2020, they received widespread acclaim for their crystal-clear sound and comfortable design. These initial successes laid the foundation for Shure’s foray into wireless ANC (Active Noise-Canceling) headphones.

Now, the second-generation Shure AONIC 50 has arrived, building upon its predecessor’s excellence with a host of upgrades that will undoubtedly set new standards in the headphone industry.

Image by https://www.makeuseof.com/

Unveiling the Upgrades: AONIC 50’s Quantum Leap

Enhanced Hybrid ANC

The most significant leap forward comes in the form of the AONIC 50’s ANC technology. This time, it’s a fully hybrid system with four distinct settings, including the intriguing “MaxAware.” MaxAware blends noise canceling with transparency, ensuring you stay connected with your surroundings while enjoying immersive sound.

Extended Battery Life

Battery life has always been a crucial factor in headphone performance. The original AONIC 50 offered a respectable 20 hours of playback on a single charge. However, the second-gen AONIC 50 now boasts a whopping 45 hours of playback time, a monumental improvement that caters to extended listening sessions. Plus, with fast charging, you can gain up to five hours of playback in just 15 minutes—ideal for those on the move.

Image by https://www.makeuseof.com/

Snapdragon Sound and Spatial Audio

Shure has not only focused on enhancing hardware but also on delivering superior audio quality. The inclusion of Qualcomm’s Snapdragon Sound ensures high-res audio streaming with support for LDAC and aptX Adaptive codecs. While Snapdragon Sound’s compatibility is currently limited, having this technology onboard opens up future possibilities for audiophiles.

Moreover, the AONIC 50 introduces spatial audio with three captivating modes:

Music: Transport yourself to a world where music resonates as if from high-end speakers.
Cinema: Immerse in cinematic soundscapes reminiscent of theater subwoofers and crystal-clear dialogues.
Podcast: Experience podcasts like never before, with enhanced clarity and a closer connection to the host’s voice.
Image by https://www.makeuseof.com/

Anticipating the Release: What to Expect

As of now, Shure has unveiled the second-generation AONIC 50 headphones at IFA 2023, but the specific launch date remains a mystery. You can anticipate these marvels hitting the shelves in September 2023, with an estimated price of £349 (USD price to be confirmed).

The AONIC 50 second-gen will initially launch in a sleek black design, with brown and white variants expected shortly after, akin to the first-generation models.

In conclusion, the Shure AONIC 50 second-generation headphones are poised to reshape your auditory world. With an array of groundbreaking features, improved battery life, and a focus on delivering exceptional audio quality, they are the ultimate choice for those seeking the pinnacle of headphone technology. Stay tuned for their official release and be ready to immerse yourself in audio nirvana.

Knowledge Source:

Gavin Phillips is a seasoned technology writer and audiophile enthusiast. With a deep passion for audio gear and a knack for unraveling intricate tech details, he has been a go-to source for tech enthusiasts seeking informed advice on audio equipment. His extensive experience in the field makes him a credible authority in the world of premium headphones.

Key Features of Shure AONIC 50 Second-Gen

Feature	Description
Spatial Audio Modes	Music, Cinema, Podcast
Battery Life	Up to 45 hours of playback
ANC Technology	Fully hybrid with MaxAware setting
Qualcomm’s Snapdragon Sound	High-res audio streaming support
Customizable EQ	Tailor your sound to your preference

Shure AONIC 50 Second-Gen vs. First-Gen: A Quick Comparison

Feature	Second-Gen	First-Gen
Battery Life	Up to 45 hours	Approx. 20 hours
Spatial Audio	Yes (Music, Cinema, Podcast)	No
Snapdragon Sound	Yes	No
Custom EQ	Yes	No
Hybrid ANC	Yes	Yes (Limited modes in first-gen)

Author

Ethan Daniel

View all posts

Costumer Services

SBCGlobal Email Not Receiving Emails: A Comprehensive Guide

Published

1 day ago

February 4, 2026

sacjim

Introduction

If you’re facing problems with SBCGlobal email not receiving emails, you’re not alone. Many users experience email delivery issues caused by server settings, outdated configurations, or account security errors. This guide will walk you through why your SBCGlobal email might not be receiving messages, how to fix it step-by-step, and when to contact professional suppor for advanced troubleshooting.

What Is SBCGlobal Email?

SBCGlobal.net is a legacy email service originally provided by Southwestern Bell Corporation, which later merged with AT&T. Even though new SBCGlobal accounts are no longer being created, millions of users still access their SBCGlobal email through AT&T’s Yahoo Mail platform.

However, because SBCGlobal operates on older infrastructure and server settings, users sometimes experience email syncing, login, or receiving issues especially when using third-party apps or outdated settings.

Common Reasons SBCGlobal Email Is Not Receiving Emails

Before you start troubleshooting, it’s important to identify what might be causing the issue. Below are the most frequent culprits behind SBCGlobal email receiving problems:

Incorrect Email Settings: If your incoming (IMAP/POP3) or outgoing (SMTP) settings are incorrect, emails won’t load properly.
Server Outages: Temporary outages or server maintenance by AT&T or Yahoo may interrupt incoming mail delivery.
Storage Limit Reached: When your mailbox exceeds its storage limit, new emails are automatically rejected.
Spam or Filter Rules: Overly strict filters or incorrect spam settings might send legitimate emails to the Junk or Trash folder.
Browser Cache or App Glitches: Cached data and outdated email apps can disrupt syncing or message retrieval.
Blocked Senders or Blacklisted IPs: Accidentally blocking a sender or being on a spam blacklist may prevent messages from reaching your inbox.
Security or Account Lock Issues: Suspicious login attempts or password errors can cause temporary account restrictions.

Step-by-Step Solutions to Fix SBCGlobal Email Not Receiving Emails

Let’s go through a series of troubleshooting steps to help you restore your email flow. You can perform these solutions on both desktop and mobile platforms.

1. Check SBCGlobal Email Server Status

Sometimes, the issue isn’t on your end.
Go to Downdetector or AT&T’s official website to see if SBCGlobal or AT&T Mail is down.
If there’s an outage, you’ll need to wait until the service is restored.

2. Verify Your Internet Connection

Ensure your device has a stable and fast internet connection. Poor connectivity can stop your email client from syncing or fetching new messages.

3. Update Incoming and Outgoing Mail Server Settings

Outdated or incorrect settings are the most common reason SBCGlobal email stops receiving messages. Here are the correct configurations:

Common Reasons SBCGlobal Email Is Not Receiving Emails

Before you start troubleshooting, it’s important to identify what might be causing the issue. Below are the most frequent culprits behind SBCGlobal email receiving problems:

Incorrect Email Settings: If your incoming (IMAP/POP3) or outgoing (SMTP) settings are incorrect, emails won’t load properly.
Server Outages: Temporary outages or server maintenance by AT&T or Yahoo may interrupt incoming mail delivery.
Storage Limit Reached: When your mailbox exceeds its storage limit, new emails are automatically rejected.
Spam or Filter Rules: Overly strict filters or incorrect spam settings might send legitimate emails to the Junk or Trash folder.
Browser Cache or App Glitches: Cached data and outdated email apps can disrupt syncing or message retrieval.
Blocked Senders or Blacklisted IPs: Accidentally blocking a sender or being on a spam blacklist may prevent messages from reaching your inbox.
Security or Account Lock Issues: Suspicious login attempts or password errors can cause temporary account restrictions.

Step-by-Step Solutions to Fix SBCGlobal Email Not Receiving Emails

Let’s go through a series of troubleshooting steps to help you restore your email flow. You can perform these solutions on both desktop and mobile platforms.

1. Check SBCGlobal Email Server Status

Sometimes, the issue isn’t on your end.
Go to Downdetector or AT&T’s official website to see if SBCGlobal or AT&T Mail is down.
If there’s an outage, you’ll need to wait until the service is restored.

2. Verify Your Internet Connection

Ensure your device has a stable and fast internet connection. Poor connectivity can stop your email client from syncing or fetching new messages.

3. Update Incoming and Outgoing Mail Server Settings

Outdated or incorrect settings are the most common reason SBCGlobal email stops receiving messages. Here are the correct configurations:

Incoming Mail (IMAP) Server:

Server: imap.mail.att.net
Port: 993
Encryption: SSL
Username: Your full SBCGlobal email address
Password: Your email password

Outgoing Mail (SMTP) Server:

Server: smtp.mail.att.net
Port: 465 or 587
Encryption: SSL/TLS
Requires Authentication: Yes

If you’re using POP3, use:

Incoming server: inbound.att.net, Port 995 (SSL required)
Outgoing server: outbound.att.net, Port 465 (SSL required)

Double-check these settings in your email client (Outlook, Apple Mail, Thunderbird, etc.) to make sure they match.

4. Review Spam and Junk Folder

Sometimes, legitimate emails end up in the Spam or Junk folder. Open these folders and mark any wrongly filtered emails as “Not Spam.”
Also, check your Filters and Blocked Addresses under email settings to ensure no important addresses are being redirected or blocked.

5. Clear Browser Cache or Update Your App

If you access SBCGlobal email through a browser:

Clear your cache, cookies, and browsing history.
Try opening email in incognito/private mode to rule out extensions or ad blockers causing problems.

If you use the Yahoo Mail App or Outlook, ensure the app is updated to the latest version. Outdated apps may not sync with the latest server configurations.

6. Check Mailbox Storage Limit

SBCGlobal email accounts have a maximum storage quota.
Delete unnecessary emails from your inbox, sent, and trash folders.
After clearing space, refresh your inbox or restart your email client — new emails should start appearing.

7. Reset or Re-Add Your SBCGlobal Account

If none of the above methods work, try removing your SBCGlobal account from your email client and re-adding it with the correct settings.
This refreshes the connection and often resolves syncing or server timeout issues.

8. Reset Your Password

If you suspect your account might have been compromised or temporarily locked, resetting your password is a smart step.

Visit the AT&T Password Reset page.
Follow the on-screen steps to verify your identity.
Set a strong, unique password and re-login to your email account.

9. Disable Security Software Temporarily

Firewall or antivirus software can sometimes block email servers.
Temporarily disable them (only if you’re confident about your network security) and check if you start receiving emails again.

10. Contact SBCGlobal Email Support

If you’ve followed all the steps and your SBCGlobal email is still not receiving messages, the issue might be server-side or linked to account configuration.
In that case, it’s best to contact SBCGlobal email support for expert help.

You can reach certified technicians.

They can assist with:

Account recovery and login errors
Server synchronization issues
Email migration or backup
Advanced spam and security settings

Having professional help ensures your account is restored quickly without losing any important messages or data.

Tips to Prevent Future SBCGlobal Email Problems

Update Passwords Regularly: Keep your email account secure and avoid login lockouts.
Use a Reliable Email App: Apps like Outlook or Apple Mail handle IMAP connections more efficiently.
Backup Emails Periodically: Regular backups protect your messages from unexpected sync failures.
Keep Storage Under Control: Delete old attachments and large files frequently.
Monitor Account Activity: Check for unusual login attempts from unknown locations.

Final Thoughts

Facing issues like SBCGlobal email not receiving emails can be frustrating, especially when you rely on your email for important communications. However, most problems can be resolved by verifying server settings, clearing browser cache, managing storage, or resetting passwords.

If you continue to face challenges, don’t hesitate to reach out to expert SBCGlobal email support for personalized assistance. A few minutes of professional troubleshooting can save hours of frustration and get your SBCGlobalemail running smoothly again.

Author

sacjim

View all posts

Development

Enhancing Mapping Accuracy with LiDAR Ground Control Targets

Published

6 days ago

January 30, 2026

Adam57

In geospatial data collection, surveyors use LiDAR ground control targets as vital tools that enhance the accuracy of aerial surveys and mapping projects. Whether they apply this technology in environmental monitoring, urban planning, or construction, users know that LiDAR produces highly detailed, precise models of the Earth’s surface.

However, to maximize this accuracy, integrating ground control targets into the process is essential. In this article, we’ll explore what LiDAR ground control targets are, why practitioners consider them important, and how they contribute to more accurate mapping.

What Are LiDAR Ground Control Targets?

Surveyors place LiDAR ground control targets as physical reference points on the ground during a LiDAR survey. These targets serve as georeferenced markers that allow surveyors to align LiDAR data with real-world coordinates. Typically, surveyors position these targets in visible locations that the LiDAR sensor mounted on the drone or aircraft can clearly detect.

Surveyors use different types of ground control targets, including reflective targets, painted markers, and geodetic targets. The choice of type depends on factors such as the survey’s scale, the required accuracy, and the terrain they survey.

How Do LiDAR Ground Control Targets Work?

LiDAR technology uses laser pulses to scan the ground and capture a wide range of data, including elevation, shape, and distance. However, the data collected by LiDAR sensors needs to be aligned with real-world coordinates to ensure its accuracy. This is where LiDAR ground control targets come in.

Georeferencing LiDAR Data

When LiDAR sensors capture data, they record it as a point cloud, an array of data points representing the Earth’s surface. To make sense of these data points, surveyors need to assign them precise coordinates. Ground control targets provide reference points, allowing surveyors to georeference point cloud data and ensure that LiDAR data aligns with existing maps and models.

By placing LiDAR ground control targets at specific locations on the survey site, surveyors can perform adjustments to correct discrepancies in the data caused by factors such as sensor calibration, flight altitude, or atmospheric conditions.

Why Are LiDAR Ground Control Targets Essential for Accurate Mapping?

LiDAR technology is incredibly powerful, but the accuracy of the data depends largely on the quality of the ground control points used. Here are the key reasons why LiDAR ground control targets are essential for obtaining precise mapping results:

1. Improved Geospatial Accuracy

Without ground control targets, LiDAR data is essentially “floating” in space, meaning its position isn’t aligned with real-world coordinates. This can lead to errors and inaccuracies in the final map or model. By placing LiDAR ground control targets at known geographic coordinates, surveyors can calibrate the LiDAR data and improve its geospatial accuracy.

For large projects or those involving multiple data sources, ensuring that LiDAR data is properly georeferenced is critical. Ground control targets help ensure the survey data integrates seamlessly with other geographic information systems (GIS) or mapping platforms.

2. Reduction of Measurement Errors

LiDAR ground control targets help mitigate errors caused by various factors, such as:

Sensor misalignment: Minor inaccuracies in the LiDAR sensor’s position or angle can cause discrepancies in the data.
Aircraft or drone movement can slightly distort the sensor’s collected data.
Environmental conditions: Weather, temperature, and atmospheric pressure can all affect the LiDAR signal.

By using ground control targets, surveyors can compensate for these errors, leading to more precise and reliable data.

3. Support for Large-Scale Projects

For larger mapping projects, multiple LiDAR scans might be conducted from different flight paths or at different times. Ground control targets serve as common reference points, ensuring that all collected data can be merged into a single coherent model. This is particularly useful for projects involving vast areas like forests, mountain ranges, or large urban developments.

How to Choose the Right LiDAR Ground Control Targets

Choosing the right LiDAR ground control targets depends on several factors, including the project’s size, the terrain, and the required accuracy. Here are some things to consider:

Size and Visibility

The size of the target should be large enough to be easily detectable by the LiDAR sensor from the air. Targets that are too small or poorly placed can lead to inaccurate data or missed targets.

Material and Durability

Ground control targets must have enough durability to withstand weather conditions and remain stable throughout the surveying process. Surveyors often use reflective materials to ensure that the LiDAR sensor can clearly detect the target, even from a distance.

Geospatial Accuracy

For high-accuracy projects, surveyors must place ground control targets at precise, known locations with accurate geospatial coordinates. They should use a GPS or GNSS system to measure and mark the exact position of the targets.

Conclusion

LiDAR ground control targets play a pivotal role in ensuring the accuracy of aerial surveys and LiDAR mapping projects. By providing precise reference points for geo referencing and adjusting LiDAR data, these targets reduce errors and improve the overall quality of the final model. Whether you’re working on a small-scale project or a large-scale survey, integrating ground control targets into your LiDAR workflow is essential for achieving high-precision results.

The right ground control targets, when placed correctly and properly measured, can make the difference between reliable, actionable data and inaccurate measurements that undermine the entire survey.

By understanding the importance of these targets and how they function in the context of LiDAR surveys, you’ll be better prepared to tackle projects that demand accuracy and precision.

Author

Adam57

View all posts

Digital Development

Scalable Web Application Development: Strategies for Growth

Published

1 week ago

January 28, 2026

Kanhasoft

Growth sounds exciting until systems start creaking under pressure. Many businesses experience this moment right after success shows up more users, more data, more “quick fixes” quietly holding everything together.

This is where web application development stops being a technical choice and becomes a strategic one. Scalable web applications create structure amid growth, replacing fragile workflows with flexible systems built to evolve.

Business scalability isn’t about guessing the future; it’s about preparing for it. A well-designed web application ensures growth feels intentional, not chaotic and that’s a difference leaders notice fast.

Understanding Business Scalability (Without the Buzzwords)

Scalability simply means handling growth without breaking what already works. More customers shouldn’t slow systems down, and increased data shouldn’t create confusion. True scalability supports growth in users, operations, revenue, and decision-making—simultaneously.

Many businesses grow in size but not in structure, leading to inefficiencies that quietly drain momentum. Scalable businesses anticipate change rather than react to it. Web applications enable this by offering centralized access, consistent performance, and flexible architecture. When scalability is baked in early, growth feels smoother and far less stressful than expected.

Why Traditional Software Fails at Scale

Legacy software often works well—until it doesn’t. Desktop tools, spreadsheets, and rigid systems struggle once teams expand or workflows become complex. Updates take longer, integrations break, and manual work multiplies.

What once felt efficient slowly becomes an obstacle. Traditional software rarely adapts gracefully to modern demands like remote access, real-time collaboration, or data-driven decisions. Businesses then rely on patches rather than solutions.

Web applications solve this by design, offering accessibility, adaptability, and centralized control—without the constant fear of outgrowing the tools that once felt “good enough.”

Role of Web Application Development in Scalability

Web application development provides the foundation for sustainable growth. Unlike static systems, web apps evolve alongside business needs. Features can be added incrementally, performance can scale with demand, and user access remains consistent across locations.

A reliable Web Application Development Company builds architecture that supports future expansion instead of limiting it. Modular design, secure data handling, and cloud readiness allow businesses to scale without disruption. Growth no longer requires replacing systems—it simply extends them. That flexibility turns web applications into long-term business assets, not short-term technical solutions.

Cloud-Based Web Apps: Scale Without Panic

Cloud infrastructure removes many traditional growth barriers. Resources expand automatically as demand increases, preventing performance dips during traffic spikes or seasonal surges. Storage, processing power, and availability scale seamlessly without costly hardware upgrades.

Cloud-based web applications also support remote teams and global users without added complexity. Costs remain predictable, aligned with actual usage instead of guesswork. Businesses gain resilience along with flexibility, ensuring growth moments feel manageable rather than overwhelming. With cloud-backed web applications, scaling becomes a controlled process—not an emergency response.

How an AI-Powered Web App Accelerates Growth

An AI-Powered Web App brings intelligence into scalability. Automation reduces manual effort as operations expand, while predictive analytics anticipate demand and performance needs. AI-driven personalization improves user engagement even as customer bases grow larger.

Decision-making becomes faster, guided by real-time insights instead of assumptions. These applications learn continuously, improving efficiency over time rather than adding complexity. Growth doesn’t require proportional increases in effort or staffing. Instead, AI-enhanced systems handle scale quietly in the background, allowing teams to focus on strategy instead of operational strain.

Custom Web Applications vs SaaS Tools

SaaS tools offer speed, but customization often hits a ceiling. Businesses adapt their workflows to the software instead of the other way around. Custom web applications align precisely with internal processes, supporting scalability without compromise. Data ownership, tailored features, and seamless integrations offer long-term value beyond subscription convenience.

As businesses mature, flexibility becomes more valuable than quick deployment. Custom solutions grow alongside operations, avoiding costly migrations later. Choosing custom web development often reflects a shift from short-term efficiency to long-term scalability and control.

Security and Compliance at Scale

Growth increases responsibility—especially around data. As user numbers rise, so do security risks and compliance requirements. Scalable web applications embed security into their architecture rather than layering it on later. Role-based access, encrypted data handling, and audit-ready systems protect both users and businesses.

Regulatory compliance becomes easier when systems are designed for transparency and control. Strong security practices build trust, which becomes increasingly valuable as visibility grows. Scalability without security isn’t progress—it’s exposure waiting to happen.

Integration Power: Scaling an Entire Ecosystem

Businesses rarely operate on a single platform. CRMs, ERPs, payment systems, and analytics tools must communicate seamlessly. Web applications act as the central connector, eliminating data silos and manual transfers. A capable Web Application ensures integrations remain stable as systems expand.

Scalable integrations improve efficiency across departments while maintaining data accuracy. When applications work together, growth feels coordinated instead of fragmented. Integration-driven scalability allows businesses to expand operations without multiplying complexity behind the scenes.

Performance Optimization for High-Growth Businesses

Performance directly affects user trust. Slow load times or frequent downtime become more noticeable as traffic increases. Scalable web applications prioritize optimization through caching, load balancing, and efficient architecture. These measures ensure consistent performance regardless of user volume.

Growth shouldn’t degrade experience—it should enhance it. High-performing systems support confidence, credibility, and retention. Performance optimization isn’t a luxury; it’s a necessity for businesses expecting sustained growth. Reliable applications quietly support expansion while users simply enjoy smooth interactions.

Real-World Examples of Scalable Web Applications

Many successful businesses didn’t start with massive systems—they grew into them. Early-stage web applications designed with scalability in mind adapt more easily to success. Features expand, integrations deepen, and data volumes increase without disrupting operations.

Teams avoid painful rebuilds because the foundation supports evolution. Growth brings challenges, but scalable systems prevent those challenges from becoming crises. Real-world scalability often looks boring on the surface—and that’s exactly the point. Stability behind growth is the ultimate success indicator.

Choosing the Right Development Partner

Scalability depends as much on mindset as technology. The right partner designs for future needs, not just immediate requirements. Experience with architecture planning, performance optimization, and App development matters. Strong partners ask strategic questions early, preventing costly adjustments later.

Collaboration extends beyond launch into continuous improvement. Businesses benefit most from development teams that understand growth patterns, not just code execution. Choosing wisely ensures scalability feels intentional rather than reactive.

Common Mistakes That Hurt Scalability

Many scalability issues begin with short-term thinking. Building only for current needs limits future flexibility. Overcomplicated designs slow growth, while ignoring performance early creates hidden bottlenecks. Another common mistake involves delaying security until problems arise.

Scalability requires balance—simple where possible, robust where necessary. Web applications thrive when architecture supports change rather than resisting it. Avoiding these mistakes early saves time, cost, and frustration later, making growth far more sustainable.

Conclusion

Scalability rarely happens by accident. Businesses that grow smoothly invest early in systems designed to evolve. Web application development provides the flexibility, performance, and control needed to support long-term expansion. With the right architecture and development approach, growth becomes manageable rather than chaotic.

Partnering with a reliable Web Application Development ensures technology supports ambition instead of limiting it. Scalability isn’t about chasing growth—it’s about being ready when growth arrives.

FAQs

What makes a web application scalable?

Scalability comes from modular architecture, cloud infrastructure, performance optimization, and secure data handling that supports growth without disruption.

How does web application development support business growth?

Web applications streamline operations, automate workflows, and adapt to increasing demand while maintaining consistent performance.

Is custom web application development expensive?

Initial investment may be higher, but long-term ROI often outweighs recurring costs and limitations of generic solutions.

When should a business invest in scalable web applications?

Early planning is ideal, but any growth-stage business benefits from scalability-focused development.

Can AI improve web application scalability?

Yes, AI enables automation, predictive analytics, and intelligent resource management.

Author

Kanhasoft

Kanhasoft is one of the leading Custom Software Development companies, specializing in Web and Mobile App development and AI-driven solutions. We deliver successful projects worldwide, including CRM Development, ERP Systems, Amazon Seller Tools, and powerful Web & Mobile Applications tailored to business needs. View all posts